TOP CATEGORIES
The Best Quality Performance Parts
Established over 10 years ago, we are an Australian company who provide only the best performance and aftermarket products for a wide range of vehicles.
SPECIAL OFFER
APR Catch Can – MK6 Golf / GTI – 1.8T/2.0T EA888 Gen 1
The APR Oil Catch Can System traps excessive crankcase oil vapors and gunk from entering the engine. The system eliminates a possible performance robbing boost leak, while reducing carbon buildup on intake valves, octane lowering oil vapors and oil pooling within the intake tract. It's a simple modification to install, drains in seconds with the flick of a knob, and is recommended at all stages of performance.
APR Double-Walled 3.5″ Slash-Cut Tips (Polished Silver) – Set of 2
Our polished slash-cut double-walled 3.5" exhaust tips upgrade the rear of the vehicle dramatically. The motorsport-inspired tips tuck nicely into the factory valance, gently following the valance's curves and demanding all the right attention in all the right places. Each tip features an engraved APR logo. Each kit is sold as a set of two tips.
Available in six finishes - Diamond Black, Brushed Silver, Polished Silver, Polished Diamond Black, Brushed & Polished.
Features:
- Double-walled and slash-cut motorsport inspired design
- Large 3.5" outer diameter
- Engraved APR Logo
- Polished silver finish
- T304 Stainless Steel
- Fits 2.5" pipe
APR Carbon Fiber Intake System – Front Airbox – 1.8T/2.0T EA888 PQ35 Platform
The APR Carbon Fiber Intake System lets your engine breathe! The stunning carbon fiber design rejects power-robbing heat from the engine bay and delivers an unrestrictive path for cold, dense air fed from outside of the engine bay. The system uses a high flow filter that provides excellent filtration without the restrictions, keeping the engine clean while optimizing power delivery. The system dramatically outflows the stock intake, sharpening throttle response and lessening strain on the turbocharger, all while supporting over 500 horsepower! The system installs in minutes, looks fantastic, delivers a sporty engine note, and is recommended at all stages of performance.
APR Roll-Control Stabilizer Bar – Rear – MQB AWD
APR Roll-Control Stabilizer Bars are designed to improve corner handling without diminishing ride quality. This simple, yet effective upgrade reduces cornering load differentials between your vehicle's inner and outer wheels during cornering. In doing so they improve the vehicle's under and oversteer balance, giving the vehicle greater stability and control, with increased grip. Each bar is manufactured using the latest high-end techniques to offer a strong, weldless design capable of withstanding harsh track conditions.
Front and rear bars are sold separately, but are designed for use together. Rear bars include a new set of poly bushings to further reduce undesirable suspension flex. Front bars also include new bushings, as well as new mounting brackets with hardware, and billet spacers. Lastly, where applicable, some bars offer further fine-tuning through the addition of multiple suspension pickup-points.
1" hollow weight-saving design with two pickup points.
APR Spacers (Set of 2) – 66.5mm CB – 7mm Thick
APR Spacers (Set of 2) – 57.1mm CB – 10mm Thick
APR Brakes – 350x34mm 2 Piece 6 Piston Kit – Front – Red – MK7 GTI
APR's Big Brake Kit Upgrades are ultra-durable, feature-packed solutions specifically tailored to each vehicle. The brakes provide outstanding stopping-power at an affordable price and are targeted towards a wide operating range, such as normal spirited street driving, track days, and HPDE events. All of the systems handily out-brake, out-last, and out-perform many systems on the market with ease. They obliterate massive factory brake systems, such as those found on the Audi RS3. Simply put, few can come close to matching the features and price point we offer with our systems. Whereas most systems on the market either make heavy sacrifices to either look fancy, cut weight, or cut costs, the APR system is designed to simply brake better, last longer, and stand the test of time.
Included Pads High-Performance Street Pads Details:
Specifically designed for use in high-performance street applications and one of the best high-performance street pads on the world market at the moment. This compound beds-in quickly and delivers strong brake performance over a wide temperature range. The material exhibits a strong initial bite as you engage the brake pedal followed by a slightly rising torque curve during a single brake application. This slight rise in brake torque in the mid-late stages of a brake application makes use of the additional front tire grip available after weight transfer has occurred during a typical (medium-hard) brake application. This delivers optimal stopping distances when tested on street cars running high-performance street tires. The compound features a high average friction co-efficient and delivers reduced stopping distances as well as improved fade resistance when compared to most OEM and aftermarket high-performance street pads.
- Optimal temperature range: 0-500 deg C (0-932 deg F)
- Best choice for most high-performance street applications
- Included pad not recommended for track day use at all (Please Note: Street/Track and Track Only pads are available)
Features:
- Large six-piston, billet-aluminum calipers with high-tensile cross-bolts for maximum rigidity
- Larger, wider 350x34mm floating 2-piece rotor assemblies with high-density directional cooling vanes and billet aluminum hats
- Rotor slot pattern specifically designed to evenly distribute heat across the rotor surface and increase initial brake response (bite) while maintaining quiet, smooth operation over a wide application range
- Rotors are coated with a proprietary black, anti-contamination finish ensuring that no oils are transferred to the brake pads
- Billet-aluminum caliper mounting brackets featuring stainless steel thread inserts for the radial mount bolts to ensure maximum durability
- Stainless-steel braided-Teflon brake lines
- Proprietary high-performance street pads included in a standard replacement shape (optional pads available)
- Lighter than factory brakes, but not so light as to introduce excessive NVH (Noise, vibration, harshness), which can occur with ultra-lightweight brake kits
- Extreme UV & temperature resistant European anodizing dyes for best color retention
- Hand-polished, mirror-finished, stainless steel pistons which reduce the rate of heat transfer to the caliper seals and brake fluid by a factor of 10 when compared to the aluminum pistons found in many other calipers
- Ultra-high temperature and pressure internal wiper seals. The internal wiper seals ensure best service life under daily street driving conditions and will also not be damaged during track day use (as is the case with the external dust boots used in many o
- All stainless-steel hardware for long-term durability and corrosion resistance
- Seamless CuNi fluid crossover tubes for maximum corrosion and vibration resistance
- Pad pre-tensioning system designed to reduce brake noise and squeal
- Maximum Temperature Recording (MTR) devices on calipers and rotors
- Laser etched logos which will not be damaged by brake fluid, or solvents (as is the case with the painted logos often used on aftermarket calipers)
- Designed, engineered, and manufactured in South Africa by the experts at Powerbrake
